2-3TPH पालतू भोजन उत्पादन लाइन

प्रत्येक प्रक्रिया की शिल्प विशेषताएं और चित्रण:

पालतू भोजन कच्चे माल के लिए उच्च तेल और वसा सामग्री के रूप में, बैचिंग प्रक्रिया से पहले नियमित पीसने से हथौड़ा मिल के लिए उच्च वसा वाले एकल सामग्री को पीसना मुश्किल हो जाएगा, इसलिए आमतौर पर हम पीसने की प्रक्रिया से पहले बैचिंग को अपनाते हैं।

कच्चे माल प्राप्त करने और सफाई अनुभाग： इस खंड में, गोली खिला सफाई और पाउडर खिलाने की सफाई स्वतंत्र रूप से अलग हो जाती है और धूल हटाने को अलग करती है। धूल हटाने का प्रभाव अच्छा है।

सफाई के उपकरण： ग्रेन्युल सिफ्टर SCY80， क्षमता 20-30T/H

First batching section: This section adopts 10batching bins, one set of batching system. It is controlled by the batching program independently developed by our company to realize accurate fast and slow feeding, fast batching and high precision.

Weighing equipment: Dosing scale PCS-05 dosing precision: dynamic ≤3‰, static ≤1‰.

first premixing and grinding section: this section adopts one ribbon mixer to achieve premixing and one hammer mill. efore entering the bins, the impuritiesare removed by magnetic separation device to ensure the safe operation of the hammer mill.

premixing equipment: Ribbon mixer SLHY1，（11KW，500kg/batch）, designed output 3-5t/h. Mixture uniformity CV ≤7%

Grinding equipment : Hammer mill SFSP568-Ⅱ, 37kw, designed to produce 3-5t/h(¢2.0mm screen hole)

Pulverizing section: Due to the extruder high requirement for the fineness of raw material, generally 60-80 mesh, this section adopts a pulverizer, adopts the pneumatic type discharging, is allocated with cyclone, pulse filter, and the grinding fineness can be adjusted.

Pulverizer equipment: SFSP668*600, 55kw; Designed output: 2-4t /h.

Second mixing section: This section adopts two secondary mixing bins, one mixer and a micro element adding port.

Mixing equipment: mixer SHSJ1, 11kw, 500kg/P, designed to produce 3-5t /h. Mixture uniformity CV≤5%.

Extruding section: This section adopts a double screw extruder, equipped with a pre-extruding round bin above the extruder and equipped with a disk-type feeder to prevent material from arch and discharge smoothly.

Extruding equipment: double screw extruder SPHS98×2，1.5+5.5+11+110+4+1.5KW(with single conditioner and double shaft differential conditioner ), design output: -3T /H (mould hole diameter 4.0mm), drying equipment: SHGW24×2-6, 0.55+1.5*2+7.5×8+ 0.55kw, design output: 4-6T/H

Coating & Bagging section: This section adopts a set of composite powder and liquid coating equipment, equipped with two weight loss type bin before entering the equipment to meet the ratio control of formula. The coating section solves the problem that the early phase of the material fat content should not be too much and then can not meet the fat content requirements. By coating, the feed appearance is good, palatability is strong, and nutrition is strong. The materials will be screened and packed after cooling by swing cooler.

Coating machine: spraying mixer SHSJ1，（11KW，500kg/P）design output: 2-3T/H, Mixture uniformity CV≤5%.

Swing cooler: SKLB4, 1.1+ 1.5kw, 4m3 volume, design output: 3-4T/H.(extruding feed has small density, large volume)

Packing equipment: Rapid single-bucket granule scale for extruding material, packing range: 20-50kg/bag, 4-6 bags/minute.

Auxiliary section: The dust removal system: it is used in the bagging system which can improving the working environment for workers; Oil adding system and Water adding system: it can improve the feed palatability.

According to the needs of different customers, the scheme can be optimized:

1. This plan adopts batching before grinding process; raw material bins also can be batching which simplify the process, save the cost. the quantity of bins and buffer hopper and be adjusted based on customer's needs, for example: set two intake buffer hopper could reduce the waiting time when batching and improve the efficiency.

2. second pulverizing process could chose pulverizer machine with higher efficiency, smaller particle size according to customer's material condition, but it will increase the cost

3. The configuration of the extruder is a single conditioner + a dual-axis difference speed conditioner. The single conditioner is to add more meat paste and fat, but if customer do not have high requirement for fat content, they can remove the single conditioner to reduce cost

4  तैयार उत्पाद पैकेजिंग उपकरण को ग्राहक के पैकेजिंग विनिर्देशों और आवश्यकताओं के अनुसार अनुकूलित किया जा सकता है। आम तौर पर, पालतू फ़ीड के तैयार उत्पाद पैकेजिंग को छोटी पैकेजिंग और बड़ी पैकेजिंग में विभाजित किया जा सकता है जो विभिन्न पैकिंग उपकरण का उपयोग करेगा